| RH-3 | |
|---|---|
| Role | Glider |
| National origin | United States |
| Manufacturer | Marvin Hicks |
| Designer | Harland Ross |
| First flight | 1 January 1963 |
| Primary user | Marvin Hicks |
| Number built | One |
| Developed from | Ross R-2 |
The Ross RH-3 is a single seat, mid-wing glider that was designed by Harland Ross.[1][2]
Contents |
Ross designed the R-3 as simplified version of the Ross R-2 Ibis with the intention of making the aircraft type easier to construct for amateur builders. The fuselage remained similar to the R-2, but the wing was redesigned as a straight wing, in contrast to the R-2's complex gull wing. The R-3 design was intended to be of all-wooden construction and employed a NACA 23018 airfoil section. Ross never constructed an example of the R-3.[1][2]
Marvin Hicks of Aurora, Colorado purchased a set of plans and built a modified version of the aircraft over a ten year period, culminating in a first flight on 1 January 1963. Hicks' aircraft used an increased span wing with flaps and a NACA 63 (3)-618 laminar flow airfoil. He designated the aircraft as the RH-3, indicating Ross-Hicks as contributing designers. The RH-3 proved to be a good performer in soaring contests.[1][2][3]
Data from Sailplane Directory and Soaring[1][2]
General characteristics
Performance
|
|||||
|
||||||||||||||